Remote Operations

Other remote operations

After listening to your messages, you can perform any of the following operations by pressing the appropriate keys on the telephone.

Note: The following commands cannot be entered while messages are being played back. If you do not want to wait until playback ends to enter a

command, first stop playback by pressing 0 and

, and then enter the

command.

 

Changing the fax reception mode

Select a new reception mode by pressing the keys as follows:

A.M. mode:

8

,

1

, and

.

FAX mode:

8

,

2

, and

.

TEL mode: 8 , 3 , and .

Caution: If you select TEL mode, you will not be able to change the reception mode again.

TEL/FAX mode: 8 , 4 , and .

Answering

Machine

3.

 

Recording a new outgoing message

1 Press 4 and

on the telephone.

2 When you hear a short beep, speak into the telephone to record the new message.

The message can be up to 15 seconds long. After 15 seconds (or earlier if the machine detects silence after you finish speaking), you will hear a beep, and the new message will be played back.

57

Page 59
Image 59
Sharp UX-S10 manual Other remote operations, Changing the fax reception mode, Recording a new outgoing message