Industry Automation and Drive Technologies - SCE
4.3Assigning the Device Name
18.Highlight module VS120 and then select, via the menu “Destination system“, at Ethernet ’Assign device name’.
Note:
A precondition for this is that the PG/PC interface is set to TCP/IP and the network card for the PC is configured correctly. For example, IP address 192.168.0.99, subnet 255.255.255.0 and router address
19. Highlight the VS100 module and then click on the button “Assign name“. Close the window.
TIA Training Document | Page 23 of 47 | Module |
E12 |
|
|
Status: 01/2010 | Vision Sensor Shape Check with SIMATIC | |
