Industry Automation and Drive Technologies - SCE
Click on Set up Sensor.
On the left of the interface, you will see a selection of tasks in the form of buttons. Activate the desired task with a mouse click on the corresponding button. The associated dialog will then be displayed on the right side of the interface.
The Web server based interface for Vision Sensor SIMATIC VS120 provides the following dialog fields for image evaluation:
•Set up
•Connections
•Training
•Evaluating
•Options
•Info
•Managing
•Stop
A traffic light is located below the task buttons that shows you at a glance the current operating mode of the evaluation device VS120.
The traffic light can display the following states:
• Green: | Evaluation mode VS120 with result output |
• Yellow: | STOP including setup and training |
• Red: | Error |
TIA Training Document | Page 35 of 47 | Module |
E12 |
|
|
Status: 01/2010 | Vision Sensor Shape Check with SIMATIC | |
