Industry Automation and Drive Technologies - SCE

Then click on the button Continue, set the parameters and draw a circular ROI (Region of Interest) around the part.

Click on the button Continue

Additional information about the parameters is provided in Chapter 4.3 of the operating instructions "Image Processing System Vision Sensor SIMATIC VS120“.

Under the tab Edges, interfering or unimportant edges can be removed.

TIA Training Document

Page 38 of 47

Module

E12

 

 

Status: 01/2010

Vision Sensor Shape Check with SIMATIC S7-300F 2PN/DP and VS120

Page 38
Image 38
Siemens E12 manual Industry Automation and Drive Technologies SCE