Siemens Electrical Lean Switch installation instructions Properties of the ELS TP40M

Introduction

Properties of the ELS TP40M

Two electrical ports (RJ-45 jacks)	10/100 Mbps (half/full duplex)
	TP connector technology (RJ-45 jack
	with MDI-X pinning)
	Max. cable length 10 m (TP Cord or TP
	XP Cord)
	In conjunction with IE FC Outlet RJ-45,
	a total cable length of a maximum of
	100 m is permitted.
Two electrical ports	10/100 Mbps (half/full duplex)
with insulation-piercing contacts	(with MDI-X pinning)
	Permitted cable types:
	- IE FC TP standard cable 6XV1840-
	2AH10
	cable length max. 100 m *
	- IE FC TP marine cable	6XV1840-
	4AH10
	cable length max. 85 m *
	- IE FC TP trailing cable	6XV1840-
	3AH10
	cable length max. 85 m*

*The specified IE FC cable lengths are reduced by 10 m if an IE FC outlet is used.

Industrial Ethernet	13
A5E00152007-03