Siemens Electrical Lean Switch installation instructions Event Configuration Window

Diagnostics over Industrial Ethernet

6.3.10Event Configuration

Clicking the Event Config menu opens the window shown in Figure 6-16. Here, you can set link up/down and cold restart events for E-mail and/or trap recipients.

Figure 6-16 Event Configuration Window

Select, for example, the first box to monitor link up/down events at Port 1 using E- mail. If there is a change in the port status, an E-mail is sent to the recipient specified in the E-mail configuration menu.

●Get Current Values/Set New Values

If you click the "Get Current Values" button, you obtain the values currently stored on the ELS. To save the entries made in this window, click the "Set New Values" button.

Industrial Ethernet	69
A5E00152007-03