Siemens Electrical Lean Switch IP address, Subnet mask, Router default gateway

Diagnostics over Industrial Ethernet

●IP address

IP address of the ELS (maximum range per field: 0 to 255). If you enter an invalid IP address, a warning is displayed and the input is rejected.

●Subnet mask

Subnet mask of the ELS (maximum range of numbers per field: 0 to 255).

●Router (default gateway)

Enter the IP address of the default gateway if the PC/Internet Browser is not in the same subnet as the ELS.

Note

Changing the parameters resets and restarts the ELS. This can take up to 15 seconds.

3.Close the folder by clicking on the icon in the menu tree again and download your configuration to the ELS

by selecting Module -> Download.

A progress bar indicates the status of the download.

You can also start this action directly using the appropriate icons in the toolbar (see Figure 6-8).

Figure 6-8 Direct Start: "Download Module"

Industrial Ethernet	55
A5E00152007-03