Ports and Displays
!Warning
Industrial Ethernet ELS TP40M switches are designed for operation with safety
The power supply unit to supply the ELS TP40M must comply with NEC Class 2 (voltage range 18 - 32 V, current requirement 150 mA).
Never connect the ELS to a.c. power supplies or d.c. power supplies greater than 32 V d.c.
Power Supply
The power supply is connected over a high resistance with the enclosure to allow an ungrounded setup. The ELS TP40M device can also be grounded using the PE screw terminal on the terminal block.
30 | Industrial Ethernet |
