Siemens Electrical Lean Switch Technical Specifications of the ELS TP40, Attachments

Technical Specifications

7.1Technical Specifications of the ELS TP40

Attachments

Attachment of DTEs or Network	2 x RJ-45 jacks with MDI-X pinning
Components over Twisted Pair	10/100 Mbps (half/full duplex)
Attachment of Industrial Ethernet FC	2 x insulation piercing contacts with
TP cables	MDI-X 10/100 Mbps (half/full duplex)
Connector for power supply	1 x 3-pin plug-in terminal block
Electrical Data
Power Supply	24 V dc supply
	(18 to 32 V dc)
	safety extra-low voltage (SELV)
Power loss at DC 24 V	3.6 W
Current consumption at rated voltage	150 mA
Overcurrent protection at input	PTC resettable fuse (0.6 A / 60 V)
Permitted Cable Lengths
Attachment over Industrial Ethernet FC	100 m standard cable
TP cables	85 m trailing cable
	85 m marine cable
TP Connection	When using the FC Outlet RJ-45, the
	following cable lengths are permitted:
	100 m for standard cable
	85 m for trailing cable
	85 m for marine cable

Note

The number of ELS switches connected influences the frame propagation time. When a frame passes through the ELS, it is delayed by the Store&Forward func- tion of the switch.

-with a frame length of 64 bytes by approximately 10 ∝s

-with a frame length of 1500 bytes by approximately 130 ∝s

This means that the more ELS switches the frame passes through, the longer the propagation time.

Aging Time

5 minutes

Industrial Ethernet	81
A5E00152007-03