Siemens G85139 Options / Accessories, Appropriate manner see .1, Please contact your local

English		7. SPECIFICATIONS
Input frequency:	47 Hz to 63 Hz
Power factor:	λ ≥ 0.7
Output frequency range:	0 Hz to 400 Hz
Resolution:	0.01 Hz
Overload capability:	150% for 60 s, related to nominal current
Protection against:	Inverter overtemperature
	Motor overtemperature
	Overvoltage and undervoltage
Additional protection:	Against short-circuits and earth/ground faults pull-out protection.
	Protection against running with no load (open-circuit)
Operating mode:	4 quadrants possible
Regulation and control:	Voltage/frequency curve
Analogue setpoint / PI Input:	0 - 10 V/2 - 10 V (recommended potentiometer 4.7 kΩ)
Analogue setpoint resolution:	10-bit
Setpoint stability:	Analogue < 1%
	Digital < 0.02%
Motor temperature monitoring:	l2t control
Ramp times:	0 - 650 s
Control outputs:	1 relay 110 V AC / 0.4 A; 30 V DC / 1 A
	WARNING: External inductive loads must be suppressed in an
	appropriate manner (see section 2.1 (5)).
Interface:	RS485
Inverter efficiency:	97% (typically)
Operating temperature:	0oC to +50oC
Storage/transport temperature:	-40oC to +70oC
Ventilation:	Fan-cooled
Humidity:	90% non-condensing
Installation height above sea level:	< 1000 m
	Note: If the Inverter is to be installed at an altitude >1000m,
	derating will be required.(Refer to DA 64 Catalogue)
Degree of protection:	Frame size A:	IP20
		(NEMA 1 using accessory kit - see options)
	Frame sizes B & C: IP20 (NEMA 1)
		(National Electrical Manufacturers’ Association)
Protective separation of circuits:	Double insulation or protective screening
Electro-magnetic compatibility (EMC):	See section 8.3

Options / Accessories

Additional RFI suppression filter
Clear Text Display (OPM2)
PROFIBUS module (CB15)	Please contact your local
SIMOVIS software for control via PC
	Siemens sales office for
Output chokes and line chokes	further details
Output filters
IP20 (NEMA 1) Accessory Kit
G85139-H1750-U049-B		© Siemens plc 1997
26/09/97	36