Installation on Notebook PCs
Rev 3.5 Feb.05 25
10. Click Next.
11. If the WindowsNT Setup window appears, system files are
required to install the components you checked. Either
insert the WindowsNT CD and enter your CD-ROM drive
letter, or enter the path to the .CAB files. Click Continue.
Note: Use the Windows NT
Diagnostics window to locate an
available IRQ and I/O space.
Make note of the COM Port that
you use to install the network
card driver. You must enter the
same COM Port when installing
the modem driver.
12. Use the drop down menus to select an I/O Port, Interrupt,
Memory, and COM Port, noting that the AirCard requires
1 IRQ and 40 bytes of I/O Space. Click Continue.
13. If the WindowsNT Setup window appears again, enter the
path to your CD-ROM drive or the CAB files.
14. Click Yes at the DHCP prompt to proceed to a display of
network bindings. (DHCP is required by the AirCard
regardless of your network configuration.)
15. Click Next to start the Network component.
16. Click Next to proceed to the window in which you enter a
Computer Name and Workgroup or Domain.
17. Enter the information appropriate to your network config-
uration and click Next.
18. Click Finish on the final window of the wizard.
19. Click Yes at the prompt to restart your PC. (You must
restart your PC to complete the driver installation.)
20. When the PC restarts, reinstall your Service Pack.
On completion of this step, the network card driver is installed
and you can proceed to install the modem driver. Follow the
instructions in the section, “Installing the modem driver” on
page26.
Installing the network card driver when Networking is
already installed:
1. Click the Adapters tab in the Network window.
2. Click the Add... button to open the Select Network Adapter
window.
3. Click the Have Disk... button to open the Insert Disk window.
4. If you have copied th e driver from the A irCard CD to your
hard drive, enter the path to the driver and click OK to
open the Select OEM Option window.
If you are installing the driver from the AirCard CD, enter
d:\Drivers\WinNT where d is the drive letter for your CD-
ROM drive and click OK to open the Select OEM Option win-
dow.
5. If Sierra Wireless AirCard555 is highlighted, click OK. The
Sierra Wireless AirCard555 should appear under Network
Adapters in the Network Setup Wizard. Otherwise, click
Cancel and repeat the previous two steps.