Sierra Wireless DART 300 manual 201, 209, 210

References					DART 300 Modem
Table 12-5: WS-Registers in CDPD Mode (continued)
Register	Description			Range	Default	Units
200	Current Channel Number (Read Only)			0 – 1023
	Reports the current channel number (1 – 1023). Zero (0)
	indicates that the modem has failed to connect to a channel.
201	Registration Result Code (Read Only)			0 – 255
	This register is not available during manual registration but
	can be read during auto-registration.
	Returns the following codes:
	Value	Meaning
	0	Success
	1 – 7	Denied by network provider
		1	No reason given
		2	MD-IS is not capable of handling M-ES at
			this time
		3	NEI not authorized on this sub-network
		4	Insufficient authentication credentials
		5	Unsupported authentication credentials
		6	NEI has exceeded usage limits
		7	Service denied on this sub-network
	248 – 253		Registration Progress Codes

248Wide area Cell transfer

249No encryption key received

250Initialization encryption

251Establishing data link

252Unable to start data link

253Awaiting registration confirmation 254 Unregistered by user

255 No response from network

209	Radio Temperature (Read Only)	-30 – +75	°C
	Returns the internal radio temperature in degrees C. Values
	outside the allowed range cause the modem to shut down the
	radio to protect it from deviating from specifications. See
	Section 11.1.1 for details.
210	Cell Number (Read Only)	0 – 65535
	Number of the current CDPD base station

212Listening Port

Specifies a port number in UDP/TCP Server mode for packet reception and auto-answer. Calling clients must use this port number to reach the DART 300.

If there is an active session, attempts to change this register will fail with the ERROR result code returned.

1025 –	2100
4999

213 Friend List Index1 – 10 1

This points to the entry in the Friends List table for use with the +WVFRIEND= and +WVFRIEND? commands.

Page 114 2110212 Rev 1.0