DART 300 Modem | User’s Guide |
10.4. Power Connection | .........................................................................................91 |
11. Installation Considerations | 93 | ||
11.1. | Environment | 93 | |
11.1.1. | Temperature and Auto Shutdown | 93 | |
11.1.2. | Temperature vs. Duty Cycle | 93 | |
11.2. | Access | 94 | |
11.3. | Power Supply | 94 | |
11.3.1. | Grounding | 94 | |
11.3.2. | Wire Splicing | 94 | |
11.3.3. | Crimp Terminals | 95 |
11.4. Mounting .......................................................................................................95
|
| References |
12. AT Commands and Status Registers | .........................................97 | |
12.1. | Introduction | 97 |
12.2. | AT Command Set | 97 |
12.3. | CDPD Status Registers | 107 |
12.3.1. | 107 | |
12.3.2. | 109 | |
12.4. Important Notes and Dependencies | 116 | |
12.5. | Result Codes | 116 |
12.6. Stored Profile Settings for CDPD Mode | 117 | |
13. Troubleshooting | 119 | |
13.1. | Introduction | 119 |
13.2. | General Communication Problems | 119 |
13.3. | General Modem Problems | 120 |
13.4. CDPD Network / Connectivity Problems | ..................................................121 | |
13.5. | Warranty | 121 |
13.5.1. Warranty Registration | 121 | |
13.6. | Obtaining Service | 122 |
2110212 Rev 1.0 | Page ix |