Sierra Wireless DART 300 manual Configuration and Use, Intstallation

DART 300 Modem				User’s Guide
				Configuration and Use
8.	UDP/TCP Service			63
8.1. Introduction				63
8.2. Configuration Checklist for UDP/TCP Service				63
	8.2.1.		NEI and Channel Restrictions	63
	8.2.2.		Registration and Sleep Mode	64
	8.2.3.		Service Options	64
	8.2.4.		Packet Assembly and Forwarding Options	65
	8.2.5.		Escape Options	65
	8.2.6.		Save Configuration	66
8.3. Using UDP/TCP Service				66
	8.3.1.		Server Sessions	66
	8.3.2.		Client Sessions	70
8.4. Sample UDP/TCP Configurations				73
	8.4.1.		Case 1 – Semi-intelligent RTU	73
	8.4.2.		Case 2 – Dumb Meter	75
9.	SLIP/PPP Service			79
9.1. Serial Line Interface Protocol (SLIP)				79
	9.1.1.		Configuring SLIP Service	79
	9.1.2.		Using SLIP Service	81
	9.1.3.		Closing a SLIP Session	82
9.2. Point to Point Protocol (PPP)				82
	9.2.1.		Configuring PPP Service	82
	9.2.2.		Using PPP Service	84
	9.2.3.		Closing a PPP Session	84
				Intstallation
10.	Device Attachment			87
10.1.		Antenna Connection		87
10.2. 3-Watt Class I Booster Operation				88
	10.2.1.		Connection	88
10.3.		The Serial Connector		89
	10.3.1.		Null-Modem Connection	89
	10.3.2.		Cable Length	90
Page viii				2110212 Rev 1.0