SMC Networks VDSL2 manual Installing an Optional SFP Transceiver

INSTALLING THE SWITCH

Installing an Optional SFP Transceiver

Line	Mgmt	O	17		O	POTS	TigerAccessTM EE Switch
				E		18	E
							SMC7816M / VSW
							ESD PORT

Figure 3-7 Inserting an SFP Transceiver into a Slot

The switch support the following optional transceivers:

Table 3-1 Optional SFP Transceivers

1000BASE-SX (SMCBGSLCX1)

1000BASE-LX (SMCBGLLCX1)

1000BASE-ZX (SMCBGZLCX1)

To install an SFP transceiver, do the following:

1.Consider network and cabling requirements to select an appropriate SFP transceiver type.

2.Insert the transceiver with the optical connector facing outward and the slot connector facing down. Note that SFP transceivers are keyed so they can only be installed in the correct orientation.

3.Slide the SFP transceiver into the slot until it clicks into place.

Note: SFP transceivers are hot-swappable. The switch does not need to be powered off before installing or removing a transceiver. However, always first disconnect the network cable before removing a transceiver.

3-8