MOUNTING
3.If installing a single switch only, turn to Connecting to a Power Source on page
4.If installing multiple switches, mount them in the rack, one below the other, in any order.
Desktop or Shelf Mounting
1. Attach the four adhesive feet to the bottom of the first switch.
VSW | / |
|
SwitchSMC7816M | ||
| EE | TigerAccess |
|
| |
E
18
POTS O
E
17
O
Mgmt
Line
Mgmt |
|
|
|
|
|
Diag | 18 O |
|
|
|
|
Fault | E | 16 | 12 | 8 | 4 |
Power | O | 15 | 11 |
| |
17 |
| 7 | 3 | ||
| E | 14 | 10 | 6 | |
|
| 13 | 9 | 5 |
|
|
|
|
| 1 |
1A | 60Hz 50- |
|
|
| 240V |
| |
Console |
| 100- | |
|
|
|
Figure 3-6 Attaching the Adhesive Feet
2.Set the device on a flat surface near an AC power source, making sure there are at least four inches of space on all sides for proper air flow.
3.If installing a single switch only, go to Connecting to a Power Source at the end of this chapter.
4.If installing multiple switches, attach four adhesive feet to each one. Place each device squarely on top of the one below, in any order.
