SMC Networks VDSL2 manual Console Port, Ethernet-over-VDSL CPE Optional Equipment

ABOUT THE TIGERACCESS EE SWITCH

Console Port

The console port on the switch’s front panel is a DB-9 connector that enables a connection to a terminal for performing switch monitoring and configuration functions. The terminal may be a PC or workstation running terminal emulation software, or a terminal configured as a Data Terminal Equipment (DTE) connection. A null-modem wired serial cable is supplied with the switch for connecting to this interface.

Ethernet-over-VDSL CPE (Optional Equipment)

The VDSL switch is designed to connect to the RJ-11 VDSL Line port on a CPE. The CPE provides users with a high-speed Internet connection via the RJ-45 Ethernet port and a standard telephone connection via the RJ-11 phone jack.

Port and System Status LEDs

The switch includes key system and port indicators that simplify installation and network troubleshooting. The LEDs, which are located on the front panel for easy viewing, are shown below and described in the following table.

1	5	9	13
				E	Power	L
2	6	10	14	17
				O	Fault
3	7	11	15
				E	Diag
4	8	12	16	18
				O	Mgmt

Figure 1-3 Port and System LEDs

1-8