10Move the cursor to “SURE TO STORE?” and press the MENU dial (press the MENU switch to cancel).
The tape is rewound and the recording starts. The display changes as follows and the data recording begins.
Name of data being recorded
a)During recording, the model name
To abort the data recording while in progress Press the MENU dial.
After the data has been recorded, the following display appears.
Notes
•It takes about three and a half minutes to record the data.
•The former setupnavi data or the recorded contents of the tape are overwritten.
Viewing SetupLog DataThe SetupLog function records camcorder settings every few seconds at shooting and displays the recorded data in the viewfinder during playback.
Note
Setup log data is not displayed when playing back a tape containing externally recorded analog signals.
To view the SetupLog Data, perform the following procedure.
1 Turn the power on and load the tape that contains the recording to be viewed.
2 Play back the tape.
For details of playback operation, see page 70.
3 Press the MENU switch upward (to STATUS position).
The display changes to page 1 of the status display.
Settings during recording
Each time you press upward the MENU switch, the status display cycles through the status pages and playback display in the order: page 2, page 3, the playback display (containing the current settings), and page 1.
Status display (page 2)
Status display (page 3)
Menus and Indications Screen Viewfinder 4 Chapter
Chapter 4 Viewfinder Screen Indications and Menus 115