![](/images/backgrounds/207764/207764-16043x1.png)
Using an Optional Microphone
Fitting the optional
Remove the two retaining screws (M3 ⋅ 8) for the | attach the |
optional microphone holder, then use these screws to |
|
| Screws removed from the |
| camcorder |
|
Fitting an optional microphone
Use the following procedure to attach an optional
1 Loosen the screw of the CAC- | Microphone adaptor |
12 Microphone Holder, then |
|
open the holder and replace the |
|
microphone adaptor with the |
|
one supplied with the ECM- |
|
670 Microphone. |
|
Connections and Fitting 2 Chapter
2 Insert the microphone in the microphone holder, close the holder, and tighten the screw. Connect the microphone cable to the MIC IN +48 V connector.
MIC IN +48 V connector
Mark
Chapter 2 Fitting and Connections | 43 |