Playback — Checking Recorded Contents

Shooting 3 Chapter

Checking the Recorded Contents Immediately After Shooting—Recording Review

Immediately after shooting, you can use the recording review function to automatically rewind and play back the last 2 to 10 seconds of the recording to check the recorded contents.

Performing recording review

With recording paused, press the RET button on the lens.

Depending on how long you hold down the button, the tape is automatically rewound over the last 2 to 10 seconds of the recording, and then this last part of the recording is shown in the viewfinder. You can also listen to the recorded sound via an earphone or the speaker. After the recorded part is played back, the camcorder is automatically returns to the pause state.

Notes

•During recording review, do not turn the POWER switch off. The camcorder may not be able to find the continue point.

•When the ClipLink function is set to oFF and you press the VTR button on the camcorder or the lens during recording preview, the recording preview is halted and recording starts. In this case, back space editing is not possible.

•When a CCU (camera control unit) is connected, the lens RET button does not function for recording review.

Viewing Monochrome Playbackin the Viewfinder

You can view a monochrome playback of the recording in the viewfinder.

1 Turn the power on.

2 Load a cassette.

3 Press the PLAY button.

This starts playback, during which a monochrome playback of the recording is shown in the viewfinder.

STOP button

REW button

PLAY button

F FWD button

EJECT

STOP

REW

PLAY

F FWD

Operation

Step

 

 

Fast forward the tape

Press the F FWD button.

 

 

Rewind the tape

Press the REW button.

 

 

Stop the tape

Press the STOP button.

Note

If two or more series of Index Pictures are recorded separately on the tape, they may be played back at back space editing points.

For details about Index Pictures, see “ClipLink Shooting” (page 77).

Viewing Color Playback

Using a color television or color video monitor, you can view a color playback (with no playback adaptors).

Connect a color television or color video monitor to the MONITOR OUT connector or the S VIDEO OUT connector.

See the previous section “Viewing Monochrome Playback in the Viewfinder” for playback operation.

70 Chapter 3 Shooting