When using equipment other than this camcorder for power supply

Break off projections A and B on the camcorder. (See step 1 of the previous section “When using a video light with a long cable”.) Insert the cable into the grip from the front hole and take out from the rear hole as shown in the figure.

Fitting the Shoulder Strap

This section describes the procedure for fitting the supplied shoulder strap to the camcorder.

1 Fit one of the clips to a

Pull up the strap to

shoulder strap fitting.

lock the fiting.

 

g

 

Clip

2 Fit the other clip to the shoulder strap fitting on the other side of the grip in the same way.

Connections and Fitting 2 Chapter

Chapter 2 Fitting and Connections

45