Menus and Indications Screen Viewfinder 4 Chapter
Viewfinder Basic Menu
Basic menu pages 8 and 9
You can create a title of up to four lines, each of twelve alphanumeric or punctuation characters, and then save it. It is then possible to record the title over the picture while shooting.
Note
You cannot set the skin detail correction while a title is displayed.
Entering the title (basic menu page 8)
1 Press the MENU switch or turn the MENU dial as necessary to display basic menu page 8 (title setting display) in the viewfinder.
If a title is already present, it appears on this screen.
2 Press and turn the MENU dial until the desired character appears.
The character cycles through the following sequence.
(Space)
Press the MENU dial when the desired character appears.
3 Press the MENU dial.
This brings up the cursor on the screen, and switches to cursor transport mode.
Initial cursor position
4 Turn the MENU dial to move the cursor to the position where you wish to insert a character.
To reverse the direction, turn the dial in the opposite direction.
5 Repeat steps 2 to 4 until the title is complete.
6 Align the cursor to EXIT and press the MENU dial.
This displays basic menu page 8 again.
The title created is retained, even when you power the camcorder off.
96 Chapter 4 Viewfinder Screen Indications and Menus