Overview 1 Chapter
Front section
1 EZ FOCUS button
2 EDIT SEARCH buttons
3 LIGHT switch
4 EZ MODE button and indicator
5 ZEBRA button and indicator
6 A.IRIS MODE switch and indicator
7 MENU switch
8 W.BAL switch
9 MENU dial
0 POWER switch
qa OUTPUT/DL/DCC+ switch qs NG button
qd GAIN switch
qf ATW button and indicator
1EZ FOCUS button
Press this button to turn the “easy focus” function on. This opens the iris, to make it easier to focus before shooting. The indication “EZ FOCUS” appears in the viewfinder while the function is on; to turn it off, press the EZ FOCUS button again. If left on, the function automatically turns off after about ten seconds.
Note
If the “easy focus” function is still on when you press the VTR button, it turns off automatically and recording starts about one second later.
2EDIT SEARCH buttons
You can see the search playback while pressing either of these buttons at recording pause mode to quickly find the next recording start point. Two playback speeds are available. Press either of the buttons to the inner position to increase the speed.
3LIGHT (video light) switch
Controls the video light connected as follows. AUTO: turns on the video light during recording if
the power switch on the light is set to on. MAN (manual): allows the power switch on the
video light to turn the light on and off.
16 Chapter 1 Overview