Sony manual 102

Viewfinder Advanced Menu

Menus and Indications Screen Viewfinder 4 Chapter

Advanced menu page 4

a)

a) For DSR-370P/570WSP: 70%

Item		Settings
MARKER		CENT/90% (normal value):
Selects ON/OFF		Displays center marker and safety
setting for center		zone marker at 90% size.
marker, size setting,		CENT/80%: Displays center
and display ON/OFF		marker and safety zone marker at
setting.		80% size.
The safety zone value		90%: Displays only safety zone
		marker at 90% size.
differs as follows,
		80%: Displays only safety zone
depending on the
		marker at 80% size.
LIMITS setting.
		CENT: Displays only center
LIMITS set to OFF: %
		marker.
value with respect to
viewfinder screen
LIMITS set to value
other than OFF: %
value with respect to
LIMITS value
LIMITS	DSR-570WS/	• 16:9 mode
	570WSP	OFF (normal value): Outputs
		safety zone according to scan size.
		4:3: 4:3 section safety zone
		13:9: 13:9 section safety zone
		14:9: 14:9 section safety zone
		15:9: 15:9 section safety zone
		• 4:3 mode
		OFF (normal value): Outputs
		safety zone according to scan size.
		13:9: 13:9 section safety zone
		14:9: 14:9 section safety zone
		15:9: 15:9 section safety zone
		16:9: 16:9 section safety zone
	DSR-370/	OFF (normal value): Outputs safety
	370P	zone according to scan size.
		13:9: 13:9 section safety zone
		14:9: 14:9 section safety zone
		15:9: 15:9 section safety zone
		16:9: 16:9 section safety zone

Item	Settings
ZEBRA	1 (normal value): Displays the
Selects type of zebra	zebra pattern over parts having a
pattern display.	video level. between 70 and 90
	IRE (or 70 and 90%).
	Use the next item (ZEBRA1) to
	select the base level.
	2: Displays the zebra pattern over
	parts having video levels of 100
	IRE or above (or 100% or above).
	1/2: Dual display (both 1 and 2)
ZEBRA1	70 IRE (normal value) to 90 IRE
Sets base level for	(DSR-370/570WS) or 70%
zebra pattern 1.	(normal value) to 90% (DSR-
	370P/570WSP):
	Can be set for each IRE step or
	1% step.
REC TIME	INT (normal value): Recording
Selects whether to	time of the internal VCR
show the recording	EXT: Recording time of the
time (TTL) of the	external VCR connected to the
internal VCR or of the	VTR/CCU connector (26-pin) or
external VCR.	DV OUT connector.
VF TALLY	⋅1: Uses only the upper REC/
Selects whether or not	TALLY indicator.
to use more than one	⋅2 (normal value): Uses two
REC/TALLY indicators	REC/TALLY indicators.
in the viewfinder
(displayed only when
the DXF-801/801CE
viewfinder is attached).
LENS SEL	1 (normal value), 2,3,4
Select the types of the	For details, see “Designating the
lens.	lens” on page 134.

102 Chapter 4 Viewfinder Screen Indications and Menus