Location and Function of Parts
Overview 1 Chapter
Rear section
1 EJECT button
EJECT STOP | REW | PLAY | F FWD | 2 Tape transport buttons and indicators |
|
|
|
|
3 EARPHONE connector
4 WARNING indicator
5 LIGHT switch
6 DISPLAY switch
7 AUDIO LEVEL
8 Display window
9 RESET/(MENU SET) button
0 Speaker
qa ALARM knob
qs MONITOR knob
1EJECT Zbutton
Press to open the cassette holder (1 on page 27) when the camcorder is powered.
2Tape transport buttons and indicators These buttons transport the tape as shown below.
Note
3EARPHONE connector
Connect an earphone or headphones. This outputs the same sound that would be output to the speaker (0 on page 21), but mutes the speaker.
4WARNING indicator
This lights or blinks when an abnormality occurs.
During recording, none of these buttons operates.
Buttons | Operation |
|
|
REW m | Rewinds the tape. The indicator lights while |
| the tape is being rewound. |
| Press while the tape is being rewound or |
| during playback to view reverse search |
| playback. |
|
|
F FWD M | Fast forwards the tape. The indicator lights |
| while the tape is being fast forwarded. |
| Press while the tape is being fast forwarded |
| or during playback to view forward search |
| playback. |
|
|
PLAY N | Plays back the recorded video. The indicator |
| lights during playback. |
|
|
STOP x | Stops the tape. |
|
|
For details, see “Warning System” on page 142.
5LIGHT switch
This switches the display window (8 on page 19) light on or off.
6DISPLAY switch
Switches time value indication shown in the display window (8 on page 19).
COUNTER: Shows the tape transport time in HH:MM:SS (hours, minutes and seconds).
TC: Shows the time code value.
18 Chapter 1 Overview