Using an AC Adaptor

Using a CMA-8A/8ACE AC Adaptor

Connect the camcorder to the AC power supply as shown in the following figure, and turn the POWER switch of the CMA-8A/8ACE ON.

To AC power source

CMA-8A/8ACE

AC Adaptor

POWER switch: ON

CCQX-3 cable

CAMERA/CCU

DC IN

Using an AC-DN1 AC Adaptor

Mount the AC-DN1 on the camcorder in the same way as a battery, then connect to the AC power source.

To AC power source

Note

When power consumption of the camcorder and accessories is 38 W or higher, use the AC-DN2A/ DN2B AC adaptor (lower than 150 W).

Using the Anton BauerIntelligent Battery System

You can equip the camcorder with a special battery mount which the Anton Bauer Corporation has developed for its Intelligent Battery System and Ultralight System.

When the camcorder is used with an Anton Bauer Digital Magnum series battery, the remaining battery capacity is shown numerically in the viewfinder display.

Contact your Sony dealer for more information.

Connections and Fitting 2 Chapter

Chapter 2 Fitting and Connections

55