Shooting 3 Chapter
CLIP and IP appear in the display window.
Display Meaning
CLIP The camcorder is in ClipLink mode.
IP The camcorder is in ClipLink mode and can record Index Pictures (when the
The following display appears on the viewfinder screen.
ClipLink mode indication: CLIP M or Ca)
Clip remaining
a) For details, see “Basic menu page 7” (page 95).
To record the cassette name/number
Access basic menu page 7 to specify a name or number for the inserted cassette (see page 95).
Notes
•If you use a cassette that contains data recorded via a different VCR when you enter a cassette name/number in the cassette memory, you may lose any data that was previously written to the cassette memory. Also, if you use a cassette that contains data recorded in ClipLink mode on the camcorder for recording on a different VCR, you may lose any data that was previously written to the cassette memory.
•When you power the camcorder or insert a cassette, black squares (x) blink in the place of the clip remaining indication in the display window (during this, the cassette memory data is being checked). Start recording after the blinking ends, or the ClipLink function will be disabled.
•When CL appears in the display window, it means that data has already been recorded into the cassette memory. If you record under this condition whether the ClipLink function is available or not, the existing cassette memory data will be overwritten. To avoid this, you can either insert a new cassette or follow the procedure for appending cassette memory data, as described in the section “Resuming Recording in ClipLink Mode” (page 81). If the CL is flashing, it means abnormality of the cassette memory. In this case, it is impossible to continue recording
78 Chapter 3 Shooting
from that data on ClipLink mode.
•The number of recordable clips varies with cassette memory capacity. Up to 45 clips (Index Pictures) can be recorded in a
3 Set the AUDIO SELECT
4 Press the VTR button on the camcorder or the lens.
Recording begins when the TALLY indicator stays lit after blinking for a moment.
The camcorder enters ClipLink continue mode (in which back space editing is possible using ClipLink function) and indication CONT appears in the display window.
During recording, the time code (HH:MM:SS format) at the recording start (Rec IN) point is recorded into the camcorder’s internal memory. Index Pictures are also recorded if you use the
Note
When CONT appears, regardless of the setting of the TC mode switch 1, the time code generator automatically enters REGEN mode. Consequently, you cannot freely specify a time code nor can you use the external synchronization (genlock) function.
5 To stop recording, press the VTR button on the camcorder or the lens.
This sets recording pause mode.
The time codes (HH:MM:SS) for the current clip (contents between the Rec IN and Rec OUT points) are recorded along with the scene number (as scene 001) in the cassette memory. The last Index Picture in the recorded scene is also recorded when the
Note
While data is being recorded in the cassette memory, cutting the power supply or opening the cassette holder is disallowed. If you turn the POWER switch off or press the EJECT button, black squares (x) blink in the place of the clip remaining indication in the display window. When the data has been recorded, the power supply is cut or the cassette is ejected.