1Iris ring

For manual iris control, set the Iris selector qs to the “M” position, and turn this ring.

2Zoom ring

For direct manual zoom control, set the ZOOM selector 7 to the “MANU.” position, and turn this ring.

3Focus ring

Turn this ring to focus the lens on the subject.

4MACRO (close-up) selector

For close-up work, turn the MACRO ring 6 while holding this button down. (See page 135.)

5F.f (flange focal length) adjustment ring and F.f (flange focal length) fixing knob

F.f adjustment ring : To adjust the flange focal length, loosen the F.f fixing knob, then turn the ring. (See page 133.)

F.f fixing knob: Fixes the F.f adjustment ring.

6MACRO (close-up) ring

For close-up, turn this ring while holding the MACRO selector down. (See page 135.)

7ZOOM selector

This selects the mode of zoom operation. SERVO: power zoom

MANU. (manual): manual zoom

8Zoom remote control connector (8-pin) Connect the optional Lens Remote Control Unit for remote control of zooming.

For details of the lens remote control unit, please contact Fuji Photo Optical Co., Ltd.

9RET (return) button

This allows you to check the video signal.

When the internal VCR is in recording pause mode, press this button to review the last few seconds of the recording in the viewfinder (recording review). When an external VCR is connected, pressing this button connects the E-E video signal1) from the external VCR to the viewfinder while the internal VCR is recording or no tape is inserted in the internal VCR.

When a CCU (camera control unit) is connected, you can view the return video from the CCU in the viewfinder.

For details, see “Playback — Checking Recorded Contents” (page 70).

0VTR button

This button starts and stops recording on the VCR. Press it once to start recording, and once more to stop.

qa Instant automatic iris adjustment button While using manual iris control, press this button to switch temporarily to automatic iris control setting. Automatic control is maintained as long as you hold the button down.

qs Iris selector

This selects the mode of iris operation. (See page 134.)

A (automatic): automatic iris

M (manual): manual iris

qd Motorized zoom lever

Use this to carry out a power zoom. Pressing the lever harder increases the zoom speed.

W end: zoom toward wide angle

T end: zoom toward telephoto

Overview 1 Chapter

..........................................................................................................................................................................................................

1)E-E video signal: “electric-to-electric” video signal. This is an input video signal which has passed through internal electrical circuits, but which has not been converted to a magnetic signal.

Chapter 1 Overview 31