Basic menu page 2

Basic menu page 4

 

 

This is displayed when the optional DSBK-501/501P

 

 

 

 

Analog Composite Input Board is fitted to the

 

 

camcorder.

 

 

 

Item

Settings

 

 

SKIN DTL

0.0 to 0.5 (normal value) to 1.0

Sets the amount of

Smaller values set a softer skin detail.

skin detail

 

correction.

 

 

 

DL LEV

LOW, STD (normal value), HIGH

Sets the

Set the amount of DynaLatitude

DynaLatitude level.

effects as high level, standard level

 

(STD), or low level.

 

 

PRE WHT

When the filter is 3200 or CROSS:

Sets the color

2200 to 3200 (normal value) to 4300,

temperature of the

filter 5600K, 5600K + 1/8ND

preset white

When the filter is 5600K + 1/64ND:

balance.

4600 to 5600 (normal value) to 12000

 

 

Item

Settings

VIDEO

CAM (normal value)

IN

Records the signal shot by this camcorder.

Selects

EXT

the

Records the signal input from the GEN LOCK IN/

signal

VIDEO IN connector. The image on the

to be

viewfinder and the signal output from the

recorded

MONITOR OUT connector are switched to the

onto the

external video signal. When inputting the external

internal

video signal, “EXT INPUT” blinks on the screen.

VCR.

 

Basic menu page 3

This is displayed when the SETUP switch has been set to FILE.

For details of this operation, see “Setup Files” (page 108).

If you set VIDEO IN to EXT and input the external VBS signal from the GEN LOCK IN connector, the image in the viewfinder and the signal output from the MONITOR OUT connector are switched to the external video signal. When inputting the external video signal, “EXT INPUT” always blinks on the screen.

Notes

•When VIDEO IN is set to EXT, the video signals are not output from the S VIDEO OUT connector.

•When VIDEO IN is set to EXT, the basic menu page 5 is not displayed.

•This page is not displayed when a CCU (camera control unit) is connected.

Menus and Indications Screen Viewfinder 4 Chapter

Chapter 4 Viewfinder Screen Indications and Menus 93