Lens for DSR-370/370P (1/2-inch type)

Product

Lens number

 

 

Fujinon: VCL-714, S16X6.7B

1

Canon: YH18X6.7KRS, VCL-719BX

 

 

 

Fujinon: S15X6.1BE, S16X6.7BE,

2

S19X6.5B, S19X6.5BE, S20X6.1BE

 

Canon: YH18X6.7IRS, H21aX5.8, H15aX6,

 

H9aX3.8

 

 

 

Fujinon: VCL-716BX

3

When referring data setting to your Sony

4

dealer.

 

 

 

Lens for DSR-570WS/570WSP (2/3-inch type)

Product

Lens number

 

 

Fujinon: VCL-916BYA, A16X9 BRM,

1

A12X6.8 BRM

 

Canon: VCL-918BY, VCL-919BY,

 

YJ18X9B KRS

 

 

 

Fujinon: A10X4.8 BEVM/BERD, A15X8

2

BERM/BERD, A16X9 BERM, A20X8

 

BEVM/BERD, A19X8.7 BERM, A19X8.7

 

BRM

 

Canon: J9aX5.2B IRS/IAS, J15aX8B IRS/

 

IAS

 

 

 

Canon: J21aX7.8B IRS/IAS, YJ18X9B IRS

3

 

 

When referring data setting to your Sony

4

dealer.

 

 

 

If you use the lens that is not mentioned above, set the lens number as follows:

•When using a lens without an extender, set it to 1.

•When using a lens with an extender, set it to 2.

•When using a lens with a ratio converter, set it to 2.

You can also ask a Sony dealer more precise settings, according to your lens. In this case, set it to 4.

Adjusting the Iris Sensitivity

When you use the VCL-716BX or VCL-719BX lens, you usually need not adjust the iris sensitivity because lenses are equipped with iris sensitivity adjustment function.

In auto iris mode, if hunting or response delay happens, adjust the iris sensitivity using the iris sensitivity trimmer.

Iris sensitivity trimmer (S or IRIS GAIN is indicated.)

IRIS

GAIN

You can see the iris sensitivity trimmer when removing the gum cap on the front of the lens driving unit. Use a mini-screwdriver to turn the trimmer. If you turn it clockwise, the sensitivity increases, and if you turn it counterclockwise, the sensitivity decreases. It is recommended that you confirm the iris sensitivity after replacing the lens.

For more information, refer to the operating instructions for the lens (or consult the lens maker).

Macrophotography

Use the macro function when the subject is less than about 1.1 m (4 feet) (for the VCL-716BX) from the front of the lens. It is possible to shoot close-ups down to a range of 10 mm (wide angle, f = 7.5 mm).

2 3

1

4

ZOOM

SERVO MANU.

1 Bring the lens up to the subject so that the image is the required size.

2 Move the focusing ring to the closest focus position.

(Continued)

Settings and Adjustments 5 Chapter

Chapter 5 Adjustments and Settings

135