Sony manual 155

How to record ClipLink log data

The following describes how to record the various ClipLink log data items.

OK/NG status

To designate a scene as “NG”, press the NG button on the camcorder while shooting the scene or at any time before you begin shooting the next scene.

All scenes that do not receive an “NG” designation are recorded as “OK” scenes.

(When you exit the VCR recording mode, changing the OK/NG status is no longer possible.)

Mark IN/OUT points time codes

This data is especially useful when shooting a video program for which a scenario has been created.

Set the camcorder to MARK mode before you start shooting. While shooting, each time you press the camcorder’s TAKE button, Mark IN and Mark OUT time codes are recorded alternately.

	Index Picture 1			Index Picture 2
Start						End
recording						recording
		Scene 1			Scene 2
		Take 1			Take 1
					Mark OUT (manual
					recording)
				Mark IN (manual
				recording)
			Mark OUT
			(manual
	Mark IN
			recording)
	(manual

recording)

Cue point time codes

This type of data is especially useful when shooting scenes that may contain unexpected events, such as when shooting for sports coverage or documentaries. Set the camcorder to CUE mode before you start to record. While recording, each time you press the camcorder’s TAKE button, the current time code is recorded as a cue point time code.

Start		Index Picture 1			End
recording					recording
			Scene 1
			Take 1
					Rec OUT
					(automatic
				Cue point recording)
				time code
			Cue point
				(manual
			time code	recording)
	Cue point		(manual
			recording)
	time code
Rec IN
	(manual
(automatic
	recording)
recording)

Appendix

Appendix 155