Appendix
Item number | Item | Setting |
| Function | |
612 | VITC | 12,281 line |
| When 29.97PsF/59.94i mode is selected on the VTR, this | |
| select (NTSC) |
|
| setting specifies the lines in which the VITC signal is | |
|
| [16,279 line] |
| inserted. | |
|
|
|
| It can be inserted in any lines from 12,281 to 20,283. | |
|
| 20,283 line |
|
|
|
|
|
|
| Note |
|
|
|
|
| Items | 611 and 612 allow VITC to be inserted in two lines. |
|
|
|
|
| |
613 | TC OUTPUT | [off tape] |
| Specifies the signal output to the TIME CODE OUT | |
| SIGNAL IN | regene |
| connector when the internal time code generator is in a | |
| REGENE MODE | through |
| mode for regenerating the playback time code (i.e. during | |
|
|
|
| auto edit mode or when item 607 is set to | |
|
|
|
| item 606 is set to “regene”). | |
|
|
|
| off tape: The playback time code signal is output to the | |
|
|
|
| TIME CODE OUT connector without regeneration. | |
|
|
|
| regene: The playback time code signal is output to the | |
|
|
|
| TIME CODE OUT connector after regeneration only | |
|
|
|
| when the VTR is in playback mode. | |
|
|
|
| through: The time code signal input to the TIME CODE IN | |
|
|
|
| connector is output as it is. | |
|
|
|
|
| |
614 | PHASE | [off] |
| Specifies whether the phase correction control of the LTC | |
| CORRECTION | on |
| signal generated by the time code generator is applied or | |
|
|
|
| not. | |
|
|
|
| off: The phase correction control is not applied. | |
|
|
|
| on: The phase correction control is applied. | |
|
|
|
|
| |
616 | VITC | 9,322 line |
| When 25PsF/50i mode is selected on the VTR, this setting | |
| select (PAL) |
|
| specifies the lines in which the VITC signal is inserted. | |
|
| [19,332 line] |
| It can be inserted in any lines from 9,322 to 22,335. | |
|
| 22,335 line |
|
| |
|
| Note |
| ||
|
|
|
| Items | 616 and 617 allow VITC to be inserted in two lines. |
|
|
|
|
| |
617 | VITC | 9,322 line |
| When 25PsF/50i mode is selected on the VTR, this setting | |
| select (PAL) |
|
| specifies the lines in which the VITC signal is inserted. | |
|
| [21,334 line] |
| It can be inserted in any lines from 9,322 to 22,335. | |
|
| 22,335 line |
|
| |
|
| Note |
| ||
|
|
|
| Items | 616 and 617 allow VITC to be inserted in two lines. |
|
|
|
|
| |
618 | LTC OUTPUT | input |
| Selects the LTC output phase. | |
| PHASE select | auto |
| input: Same phase as input video. | |
|
| [output] |
| auto: When editing, same phase as input video; otherwise | |
|
|
|
| (playback, recording, etc.), same phase as output | |
|
|
|
| video. | |
|
|
|
| output: Same phase as output video. | |
|
|
|
|
| |
619 | EXT LTC MODE | direct |
| Selects the recording mode when the internal time code | |
|
| [regene] |
| generator is set to regenerate the input from the TIME | |
|
|
|
| CODE IN connector (menu item 607 is set to | |
|
|
|
| menu item 606 is set to “regene”). | |
|
|
|
| direct: Records the time code input from the TIME CODE | |
|
|
|
| IN connector unaltered on the tape. | |
|
|
|
| regene: Regenerates the time code input from the TIME | |
|
|
|
| CODE IN connector with the internal time code | |
|
|
|
| generator. | |
|
|
|
|
| |
620 | SUPERIMPOSED | [off] |
| Specifies whether or not to superimpose time data and | |
| CHARACTER | on |
| operating status information on the signal output from the | |
|
|
|
| MONITOR connector of SD SDI OUT, the SD OUT | |
|
|
|
| COMPOSITE connector and HD SDI OUTPUT connector. | |
|
|
|
| off: No information is superimposed. | |
|
|
|
| on: Information is superimposed. | |
|
|
|
|
|
|
156 Menu List