Parts of Functions and Locations 2 Chapter

2-1-1 Upper Control Panel

1POWER switch

2ERROR indicator

3WARNING indicator

4 EJECT button

5 Format indicators

SRW-5000

HD DIGITALVIDEO CASSETTE RECORDER

POWER

 

EJECT

 

 

 

ERROR WARNING

 

PHONES

CHANNEL

REMOTE

 

ETHERNET 1(9P) 2(50P)

 

CONDITION

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cassette

 

compartment

 

 

6 REMOTE buttons

 

 

7CHANNEL CONDITION indicators

8PHONES level control

9PHONES jack

aPOWER switch

Pressing on the ‘(’ side of this switch powers the unit and lights up the information display (see page 20) and color display (see page 18). To turn the unit off, press on the ‘a’ side of the switch.

bERROR indicator

This lights when a serious problem occurs, such as an operational malfunction or system internal error. You can check the details on the lower control panel.

For details, see “Error Messages and Warning Messages” on page 134.

cWARNING indicator

This flashes when there is a fault in the unit. You can check the details on the lower control panel.

For details, see “Error Messages and Warning Messages” on page 134.

dEJECT button

Pressing this button automatically ejects the cassette after several seconds.

eFormat indicators (Digital BETACAM/HDCAM/ HDCAM SR)

These show the format of the cassette loaded into the unit.

fREMOTE buttons

Press one of the following buttons, to select how the VTR is controlled.

ETHERNET: This button lights when pressed, enabling access from the network connected to the ETHERNET connector on this unit.

1(9P): This button lights when pressed, enabling this unit to be controlled from a device connected to the REMOTE 1-IN(9P) connector or REMOTE 1-I/ O(9P) connector.

2(50P): This button lights when pressed, enabling this unit to be controlled from a device connected to the REMOTE 2 PARALLEL I/O(50P) connector.

Note

When the VTR is being controlled by the external equipment connected to the REMOTE 1-IN(9P) or REMOTE 2 PARALLEL I/O(50P) connector, all tape transport buttons and edit operation buttons are disabled, except the STOP and EJECT buttons. You may also specify the disabling or enabling of all buttons by setting the VTR SETUP menu item 008 “LOCAL FUNCTION ENABLE”.

gCHANNEL CONDITION indicators These show the status of the playback signal. Blue: The playback signal status is satisfactory. Yellow: The playback signal is somewhat degraded, but

playback is possible.

However, if this indicator remains lit continuously, head cleaning is required.

Red: The playback signal has deteriorated.

If this indicator remains lit continuously, head cleaning or internal inspection is required.

16 2-1 Control Panel