Prerolling to a cue point

2

 

 

 

1

3

4

 

 

 

 

 

1

Press the ALT/[F8] (PAGE MODE) buttons or the

 

 

 

ALT/[F9] (EXTEND MODE) buttons.

 

2

If you selected PAGE mode, press the [F1] (PREV

 

 

 

 

 

 

 

 

 

PAGE) button or [F2] (NEXT PAGE) button to select

 

 

 

 

 

 

4Chapter

 

 

 

 

[F8] (PAGE SET) button).

 

 

 

 

 

a desired page (or use the numeric buttons to enter the

 

 

 

page number in the data entry window, then press the

Menu

3

Press the cursor R or r button to move the cursor (B) to

Settings

 

 

the cue number.

 

 

 

 

 

 

 

 

 

 

To select the cue number directly by the numeric

 

 

 

buttons

 

 

 

 

 

Enter the cue number in the data entry window with

 

 

 

the numeric buttons, then press the [F9] (CUENUM

 

 

 

SET) button.

 

 

 

4

Press the PREROLL button.

 

 

4-4-5 Changing a Cue Point Into an Edit Point

Follow the procedures below to change a selected cue point into an edit point.

To change an edit point into an IN point

Press the SET button while holding down the IN button.

To change an edit point into an OUT point

Press the SET button while holding down the OUT button.

To change an edit point into an AUDIO IN point Press the SET button while holding down the AUDIO IN button.

To change an edit point into an AUDIO OUT point Press the SET button while holding down the AUDIO OUT button.

AUDIO IN button AUDIO OUT button

IN button

SET button

OUT button

4-4-6 Backspace Editing

You can perform backspace editing with the CUE menu. In backspace editing, assemble editing is performed from the recording end point. Thus, before starting backspace editing for the first time, you must record for at least one minute or so on the tape before you can do backspace editing. After recording, the present end of the recorded portion becomes the recording end point. When you press the AUTO button and then press the REC/EDIT button, the VTR automatically prerolls a few seconds before the recording end point and starts assemble editing. If no data for the recording end point exist, backspace editing is not performed.

The recording end point will be cleared when you eject the tape.

Note

Cue point data is cleared when a cassette is inserted. However, cue point data recalled from a memory stick before a cassette is inserted is not cleared when a cassette is inserted.

4-4-7 TELE FILE Menu

The TELE FILE menu screen is different in HDCAM-SR and HDCAM formats.

In HDCAM-SR format: The cassette has a memory label attached as standard, and this screen allows operations to read out, enter, or change the cassette ID identification, recording format, recording information, management information, and so on. In the HDCAM-SR format, each recording automatically adds recording information. However, if the recording time is less than 2 seconds, or if when recording ends the measurement on the spool was not complete, then no recording information is added. In the case of an HDCAM-SR cassette, a cassette without a memory label is ejected.

72 4-4 CUE Menu