off: Clear write protection for the whole TELE FILE menu.
To change the TITLE data
1
2 With the cursor R or r button, select “TITLE”, and press the ENTRY button.
3 With the cursor T or t button, select the character to be entered.
4 Press the [F7] (SET LETTER) button or cursor center button.
The selected character is entered.
5 Repeat steps 3 and 4, to enter the data.
To enter a space
Press the [F5] (SPACE) button.
If you make an error in entry
Press the [F6] (BACK SPACE) button, then repeat the entry.
To return to the initial screen
Pressing the [F9] (CANCEL) button returns to the initial screen.
To change a character during the operation
Press the cursor R button, then move the cursor to the title frame; with the cursor T or t button, change the character insertion position.
When not all characters can be shown within the title frame
On the left or right of the title frame, < or , appears.
6 Press the [F10] (SAVE/EXIT) button.
This return to the initial menu screen.
To change time data
To write the current time data, use the cursor buttons to align the entry cursor with the line in which you want to write.
To move the cursor with the numeric buttons Enter a line number with the numeric buttons, and press the [F9] (CUENUM POINT) button. The cursor moves to the line number you entered.
Note
If the cursor buttons are not linked to movement of the entry cursor, it is not possible to move the entry cursor
Bwith the cursor buttons.
To link the cursor buttons to movement of the entry cursor
Press the cursor center button. To unlink, press the cursor center button once again.
Press the ENTRY button to write the current time data over the time data in the line in which the entry cursor
Bis present.
Note
If you press the ENTRY button when the entry cursor is not on the screen, the time data of the line in which the entry cursor B is currently present is written and displayed on the screen.
To enter the current time data as a new line
1 With the cursor buttons, move the entry cursor to the line below the position in which you want to insert.
For how to move the cursor, see “To change time data” above.
2 Hold down the SFT button and press the ENTRY button.
The line is inserted immediately before the line on which the entry cursor is present, and the current time data is written.
To delete a time code
1 Use the cursor buttons to move the cursor to the Time section to be deleted.
To move the cursor using the numeric buttons Enter the line number using the numeric buttons. Then press the [F9] (CUENUM POINT) button. The cursor will move to the line specified by the numeric buttons.
2 Press the [F5] (DEL POINT) button.
A deletion confirmation window appears.
3 Press the [F5] (DEL POINT) button while holding down the SFT button.
The time code section becomes blank and is ready for new time data input.
To delete the line as well as the time code
Use the cursor buttons to move the cursor to the time code to be deleted.
Then press the [F5] (DEL POINT) button while holding down the SFT button. The line is deleted and all the line numbers below are decreased by one.
Settings Menu 4 Chapter