Parts of Functions and Locations 2 Chapter
3Remote input/output section
1RS232C connector
2
3REMOTE 2 PARALLEL I/O(50P) connector
4VIDEO CONTROL connector
5
REMOTE 2 PARALLEL I/O(50P)
REMOTE | REMOTE |
RS232C | VIDEO CONROL |
ETHERNETUSB
6USB connector
7ETHERNET connector
aRS232C connector
This is used for manufacturing and services.
bREMOTE
Use this, with the supplied
cREMOTE 2 PARALLEL I/O(50P) connector (D- sub
Inputs an external remote control signal.
For details, refer to the Maintenance Manual Volume 1.
dVIDEO CONTROL (Digital Video Processor Control) connector
Connects to the optional
eREMOTE
Use this, with the supplied
fUSB connector
This is used for manufacturing and services.
gETHERNET connector
Used for monitoring the VTR by SNMP, or for setting or changing VTR settings by HTTP.
CAUTION
For safety, do not connect the connector for peripheral device wiring that might have excessive voltage to this port. Follow the instructions for this port.
4Power supply
AC IN
Connects to an AC outlet using an appropriate power cord.
28