Item number

Item

Setting

Function

005

SERVO/AV

[input]

The servo reference is determined by the following menu.

 

REFERENCE select

auto

input: The reference signal is obtained from the HD SDI

 

 

external

INPUT A/B connectors.

 

 

 

auto: During recording and in the edit preset state, the

 

 

 

reference signal is obtained from the HD SDI INPUT A/

 

 

 

B connectors .

 

 

 

When item 001 is not set to “off”, the reference signal is

 

 

 

always external.

 

 

 

In all other cases, the servo operates using the signal

 

 

 

selected in item 006 as the reference signal. If the

 

 

 

signal selected in item 006 is not present, the servo

 

 

 

operates using an internal reference signal.

 

 

 

external: The servo reference signal is always external.

 

 

 

 

006

EXTERNAL

[extrn HD]

When item 005 is set to “external”, this selects the signal

 

REFERENCE select

extrn SD

used as reference by this unit.

 

 

 

extrn HD: The signal input to the REF. INPUT 1 connector

 

 

 

is used as the tri-level HD reference signal for playback

 

 

 

and audio signal recording.

 

 

 

extrn SD: The signal input to the REF. INPUT 1 connector

 

 

 

is used as the SD reference signal for playback and

 

 

 

audio signal recording.

 

 

 

 

007

SYNC PLAY

[off]

This is the mode for automatic correction at the start of

 

 

on

playback. In sync play mode, for example when playing

 

 

 

back the VTR from a preroll point, the IN point is reached

 

 

 

after exactly the preroll time has elapsed.

 

 

 

off: Selects normal playback mode.

 

 

 

on: Activates the sync play function for playback.

 

 

 

 

 

Note

 

 

 

 

 

 

In sync play mode, the time after the tape transport starts

 

 

 

 

 

until the video and sound appear is longer than in the

 

 

 

 

 

normal playback mode.

 

 

 

 

 

008

LOCAL FUNCTION

all disable

When this unit is used in remote control mode, this selects

 

 

 

ENABLE

[stop&eject]

which buttons on the control panel operate.

 

 

 

 

all enable

all disable: All switches and buttons are disabled.

 

 

 

 

 

 

 

 

stop & eject: Only the STOP and EJECT buttons operate.

 

 

 

 

 

 

 

 

local key map

 

 

 

 

 

 

 

 

all enable: All switches and buttons except the RECORDER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

and PLAYER buttons are enabled.

Appendix

 

 

 

 

local key map: Only the buttons enabled in item 009 are

 

 

 

 

 

 

 

 

 

 

operational.

142 Menu List