Preventing double cassette inserting
When a cassette is loaded, an orange
Ejecting the cassette
Press the EJECT button.
The tape is unthreaded and the cassette is automatically ejected. This operation takes a few seconds.
To cancel ejecting a cassette
Press any operation button before the cassette is completely ejected. The cassette is loaded again and the operation corresponding to the button you pressed starts.
To prevent accidental erasure of material recorded on a tape, push in the
Push in the
To restore the tape for recording, return the plug to its original position. (OFF)
When a cassette with this plug pushed in is inserted into the VTR, the REC INHIBIT indicator on the lower control panel lights up and recording will not start, even if you press the REC/EDIT button.
To restore the tape for recording, return the plug to its original position.
3-4 Using a Memory Stick
When a Memory Stick is inserted in the VTR, the file data can be stored on the Memory Stick, which enables you to share data among VTRs.
Inserting a Memory Stick
Insert a Memory Stick with the label side up into the Memory Stick slot until it clicks and the access lamp lights in red.
Eject button
Memory Stick
Label side up
Note
Never insert/remove a Memory Stick during access to data.
To remove a Memory Stick
Push the eject button on the Memory Stick PC card adaptor, and pull the Memory Stick out.
On Memory Stick
Memory Stick is a new compact, portable and versatile IC recording medium with a data capacity that exceeds that of a floppy disk. Memory Stick is specially designed for exchanging and sharing digital data among Memory Stick compatible products. Because it is removable, Memory Stick can also be used for external data storage.
Types of Memory Stick
There are two types of Memory Stick: MagicGate Memory Stick that is equipped with the MagicGate copyright protection technology and general Memory Stick. Use the general type of Memory Stick (8MB, 16MB, 32MB, 64MB, 128MB) with this unit.
VTR the Up Setting 3 Chapter
35 | |
|
|