Settings Menu 4 Chapter
1 Make the VTR SETUP menu and PF assignment settings.
2 In the VTR BANK menu screen, save the current settings in any VTR bank.
It is preferable to add a title to identify the settings, and protect the settings not to be overwritten.
3 Press the ALT button.
This switches to the ALT + BANK menu screen.
4 Press the [F4]
A red “P” appears to the left of the VTR BANK title. Each time you press the [F4]
5 Press the ALT button, to return to the VTR BANK menu screen.
Next time you power on, the settings will automatically be recalled from SETUP BANK in the VTR bank with “P” set.
Note
Unless VTR SETUP menu item 116 “ALARM BEEP” is set to “off” to distinguish the automatic recall from a normal startup, a beep sound occurs twice.
|
| VTR | BANK |
|
| VTR | BANK |
|
|
| DEFAULT | BANK 1 | B CURRENT | DEFAULT | |||
|
|
|
|
|
|
|
|
|
|
| (Preset) | C |
| 1 | (Untitled) |
| |
U N D O |
|
|
| |||||
|
|
|
|
| F | (Preset) | ||
E D I T |
| D I R E C - | C O P Y | E X I T |
|
T I T L E |
| T I O N |
|
|
|
|
| B |
|
|
|
The procedure for saving from CURRENT DEFAULT to DEFAULT BANK, saving from DEFAULT BANK or FACTORY PRESET (factory setting) to CURRENT DEFAULT, changing the title, or setting protection, is the same as operation on a VTR bank.
For details, see
Notes
•The storage region for DEFAULT BANK is one set only.
•The title name shown in the current area is always that for the CURRENT SETUP data. When DEFAULT BANK data with the title changed is written to CURRENT DEFAULT, the title of the current area does not change.
Also, when CURRENT DEFAULT settings are saved in DEFAULT BANK, the title of DEFAULT BANK is copied from the title of CURRENT SETUP.
For each VTR SETUP menu item, you can change the factory DEFAULT value to a desired value.
For details, see “To change the DEFAULT values in a menu item” on page 100.
These changed DEFAULT values can be saved in a VTR BANK of the VTR.
1 Press the SET UP button.
The SETUP menu screen appears.
2 Press the ALT button.
The ALT + SETUP menu screen appears.
3 Press the [F1] (DEFAULT VTR BANK) button.
The DEFAULT VTR BANK screen appears.
DEFAULT Settings in a “Memory
Stick”
For each VTR SETUP menu item, you can change the factory DEFAULT value to a desired value.
For details, see “To change the DEFAULT values in a menu item” on page 100.
The set DEFAULT values can be saved in a “Memory Stick”.
1 Insert a “Memory Stick”.
2 Press the SET UP button.
The SET UP menu screen appears.
3 Press the ALT button.
The ALT + SETUP menu screen appears.
48