• Between AUDIO IN and AUDIO OUT points
Durations are calculated as follows.
•If both IN and OUT points are set, the duration is the time between the points.
•If one of the edit points is not set, the duration is set to 00:00:00.
1 Press the RECORDER or PLAYER button to select the VTR for which you want to confirm a duration.
The button lights up.
2 Hold down any two IN, OUT, AUDIO IN, or AUDIO OUT buttons.
The duration between the points corresponding to the two buttons is displayed. The value can be negative.
T I M E R | PLAY LOCK | |
S E L |
|
|
T C | D F |
|
|
|
|
| 0H 01M 00S 00F |
|
| ||||||
T I M E R |
| D U R |
|
| Duration | |||||||
|
|
|
|
|
|
|
|
|
|
|
| |
R E S E T |
|
|
|
|
|
|
|
|
|
|
|
|
|
| AIN | 00:01:10:00 AOUT | 00:02:10:00 |
|
| between two | |||||
T I M E R |
| IN | 00:01:10:00 | OUT | 00:02:10:00 |
|
| |||||
S E T |
|
|
|
|
|
|
|
|
|
|
| edit points |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
T I M E R |
|
|
|
|
|
|
|
|
|
|
|
|
H O L D |
|
|
|
|
|
|
|
|
|
|
|
|
o f f |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
T C R |
| R E G E N E | T C G | R U N |
| D F / N D F | T C 2 |
|
|
| ||
S E L |
| S O U R C E | M O D E | M O D E |
|
|
| S E L |
|
|
| |
V I T C |
| i n t |
| p r s t | r e c |
|
| d f |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You can preroll the tape to a point prior to the edit start point, or cue up the tape to any edit point.
Follow the procedure below to cue up or preroll the tape.
1
2
1 Press the RECORDER or PLAYER button to select the VTR which you want to operate.
The button lights up.
2 To cue up the tape to an edit point
Press one of the IN, OUT, AUDIO IN, or AUDIO OUT button while holding down the PREROLL button.
The tape moves to the edit point corresponding to the button, then stops.
To preroll the tape
Press the PREROLL button.
The tape is rewound to a point before the edit start point by the amount determined by the preroll time setting.
Note
When the [F1] (TIMER SEL) button in the TC menu is set to CTL mode, cuing up is slightly slower than in TC mode. This is to maintain the accuracy of the CTL signals.
You can set up the VTR so that priority is placed on cuing accuracy or speed. Change the setting of the VTR SETUP menu item 403 “CUEUP BY TC” and menu item 404 “CUEUP BY CTL”.
Changing the preroll time
The preroll time is factory set to 5 seconds, but can be set to any time between 0 and 30 seconds, in
For details, see
When changing the preroll time, set it so that the recorded section prior to the edit start point is longer than the preroll time.
The preroll time used in automatic editing is the preroll time set for the recorder.
Follow the procedure below to preview the edit.
AUTO button
PREVIEW/REVIEW button
PREROLL button
STOP button
To preview the edit, press the AUTO button to switch to AUTO mode, then press the PREVIEW/REVIEW button.
Editing 6 Chapter