Item number | Item | Setting | Function |
A05 | PD EXT SD REF | [off] | When the operating frequency is set to 23.98PsF, specifies |
| LOCK MODE | lock1 | whether or not the pulldown output signal and down- |
|
| lock2 | converted output signal are synchronized with the |
|
|
| reference signal by the REF. INPUT 2 connector. |
|
|
| off: The pulldown output signal and |
|
|
| signal are not synchronized with the reference signal |
|
|
| by the REF. INPUT. 2 connector. |
|
|
| lock1: The pulldown output signal and |
|
|
| output signal are synchronized with the reference |
|
|
| signal by the REF. INPUT 2 connector. |
|
|
| lock2: The pulldown output signal and |
|
|
| output signal are synchronized with the reference |
|
|
| signal by the REF. INPUT 2 connector. When the PB/ |
|
|
| EE mode is selected, the amount of delay on the A |
|
|
| frame of the pulldown output signal for the A frame of |
|
|
| the main video signal is fixed to 2 frames (59.94i). |
|
|
| Notes |
| |
|
|
| • | A warning message appears when the HD reference | |
|
|
|
| signal and REF. INPUT 2 reference signal are not input or | |
|
|
|
| not synchronized. | |
|
|
| • | “lock1” and “lock2” are effective only when the operation | |
|
|
|
| mode of this unit is set to 23.98/24PsF. | |
|
|
| • | When editing in 23.98/24PsF mode, with this unit as the | |
|
|
|
| recorder and with “lock2” selected, phase | |
|
|
|
| synchronization may not be achieved within 5 seconds. | |
|
|
|
| Also, edit In points may be out of alignment. In these | |
|
|
|
| cases, select “off”. | |
|
|
|
| ||
A06 | PD | [off] | When item 620 and A03 is set to “on”, specifies whether or | ||
| SUPERIMPOSED | on | not the ID (24F/30F) is displayed to the right of | ||
| TIME CODE ID |
| superimposed time code. | ||
|
|
| off: No ID is displayed. | ||
|
|
| on: ID (“24F” or “30F”) is displayed. |
|
|
| Note | setting of this item is effective only when the operation |
| |
|
|
|
| |||
|
|
|
| |||
|
|
|
|
| ||
|
|
| The |
| ||
|
|
|
| |||
|
|
|
| |||
|
|
| mode of this unit is set to 23.98PsF or 24PsF. |
| ||
|
|
|
| |||
|
|
|
| |||
|
|
| Appendix | |||
|
|
|
|
| ||
A07 | MODE |
| first line instead of | |||
PD CHARACTER | [off] | When item 620 and A03 is set to “on”, specifies whether or |
| |||
| 24F TIME CODE | on | not the 2 : 3 pulldown |
| ||
|
|
| off: |
| ||
|
|
| on: |
|
|
|
| Note |
|
|
|
| The | setting of this item is effective only when the operation |
|
|
| mode of this unit is set to 23.98PsF or 24PsF. | |
|
|
|
| |
A08 | FC REFERENCE | extrn HD | Selects the signal to be the reference for the FORMAT | |
| select | [extrn SD] | CONV. OUT input to the REF. INPUT 2 connector. | |
|
|
| extrn HD: Use the HD | |
|
|
| REF. INPUT 2 connector as the FORMAT CONV. OUT | |
|
|
| reference signal. | |
|
|
| extrn SD: Use the SD reference signal input to the REF. | |
|
|
| INPUT 2 connector as the FORMAT CONV. OUT | |
|
|
| reference signal. |
Menu List 177