7 Press the PREVIEW/REVIEW and PREROLL buttons at the same time.
The tape prerolls and the player VTR begins playing at the initial speed.
8 When the x indicator appears with a beep indicating that the IN point has been passed, rotate the search dial to the desired playback speed(s).
The varying playback speeds are stored in memory while the x indicator appears in the display.
9 Press the STOP button.
If the x indicator goes off before you press the
STOP button
The VTR has reached its storage capacity, and cannot store any more playback speed variations.
To exit DMC editing mode
Press the ALT/[F7] (DMC) buttons in HOME menu.
Performing DMC editing
After setting the playback speeds in preview mode, press the RECORDER button and REC/EDIT button.
DMC editing is performed at the playback speed(s) stored in memory.
PREVIEW/REVIEW button
To confirm the results of DMC editing
Press the PREVIEW/REVIEW button.
Animation editing is a form of insert editing which makes it easier to record a succession of still frames in fixed field or frame units. The procedure for editing after selecting animation editing is exactly the same as for normal insert editing.
To select animation editing, use the VTR SETUP menu item 301 “EDIT OPERATION MODE”.
normal: Selects normal insert editing.
CG: Selects editing in frame units, principally for recording computer graphics (CG).
When the edit completes, the OUT point
automatically becomes the next IN point, and the next OUT point is set automatically with 1 frame added.
Follow the procedure below to perform animation editing.
2 3
| 1 | 4 |
|
|
|
|
|
|
|
1 | Set the IN point. |
|
|
|
| The OUT point is set automatically. |
|
|
|
2 | Press the AUTO button. |
|
|
|
| The button lights up. |
|
|
|
3 | Press the PREVIEW/REVIEW button to preview. |
| ||
4 | Press the REC/EDIT button. |
|
|
|
|
|
| ||
|
|
| ||
|
|
| ||
|
|
| ||
| Automatic editing starts. |
|
|
|
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
| Chapter | |
| becomes the next IN point, and the next OUT point is | |||
| When the edit completes, the OUT point automatically |
| ||
| set automatically. |
|
| 6 |
Repeat steps 3 to 4 to perform animation editing. | Editing | |||
| ||||
Video and digital audio signals already recorded on the tape can be used as an edit source for insert editing. This type of editing is called preread editing, as the VTR uses preread heads to read signals in advance. Signals that are read in advance can be sent to mixers for mixing, then recorded to the original channels or other digital audio channels.
The preread editing settings are performed with the ALT/ [F1] (PRE READ) buttons in the HOME menu.
For details on the settings, see