To move the cursor using the numeric buttons Enter the line number using the numeric buttons. Then press the [F9] (CUENUM POINT) button. The cursor will move to the line specified by the numeric buttons.
2 Use the numeric buttons to enter the time data in the data entry window, and then press the SET button.
For example, to enter 00:01:30:00, press the numeric buttons as follows: 0, 0, 1, 3, 0, 0, 0. (There is no need to enter the first zero. When you enter a number that is less than eight digits long, the unspecified digits are automatically set to zero when the SET button is pressed.)
C U E | REC | DATE[2003/05/14] | EOS[00:00:12:08] | ||||||||
S C A N | TITLE[ |
|
|
|
|
|
|
| ] Rest100% | ||
|
|
|
|
|
|
|
| ||||
| No. |
| Out |
|
| Tk | Cut | Scn | |||
E N T R Y |
|
|
|
|
|
|
|
|
|
|
|
P O I N T | 0 |
| 00:14:17:02 |
| 9 | AAA |
|
| |||
|
|
|
|
| |||||||
I N O U T | 1 |
|
|
|
|
|
| ||||
|
|
|
|
|
|
| |||||
C O M M N T |
|
|
|
|
|
|
|
|
|
|
|
E D I T |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
C H A N G E |
|
|
|
|
|
|
|
|
|
|
|
D A T A |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
D E L | M A R K |
| P R O - | T A P E | C U E N U M | W R I T E / |
| ||||
P O I N T |
|
|
| T E C T | I N F O | P O I N T |
| E X I T |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
3 Press the IN button (to enter IN point data) or OUT button (to enter OUT point data).
The number is entered or it replaces the existing IN/ OUT point data.
To clear the IN/OUT point data
Use the cursor buttons to move the cursor to the IN/OUT section to be cleared, and then press the CLR button while holding down the IN button (to clear IN point data) or OUT button (to clear OUT point data), or press the IN or OUT button (to clear both IN and OUT point data) while holding down the CLR button.
To increase or decrease IN/OUT point data one frame at a time
Use the cursor buttons to move the cursor to the IN/OUT section to be increased or decreased, and then press the + button (to increase the time data) or the – button (to decrease the time data) while holding down the IN button or the OUT button. Each time you press the + or – button, the time data is increased or decreased by one frame, respectively.
To recall IN/OUT point data to the data entry window
Use the cursor buttons to move the cursor to the IN/OUT section to be recalled, and then press the RCL button while holding down the IN button (to recall IN point data) or the OUT button (to recall OUT point data).
To enter the current time code continuously
1 Set the VTR SETUP menu item 127
2 Use the cursor buttons to move the cursor to the IN/ OUT section to be entered.
To move the cursor using the numeric buttons Enter the line number using the numeric buttons. Then press the [F9] (CUENUM POINT) button. The cursor will move to the line specified by the numeric buttons.
3 Press the IN button or OUT button while holding down down the ENTRY button.
The movement of the cursor is automatic (as described in the following table) and data is entered continuously.
Input | When the IN button | When the OUT |
condition | you press while | button you press |
| holding down the | while holding |
| ENTRY button | down the ENTRY |
|
| button |
Only IN point | IN point data is | OUT point data is |
data has been | modified and the | entered and the |
entered | cursor stays on the IN | cursor moves to the |
| point data. | next IN point. |
|
|
|
Only OUT | IN point data is | OUT point data is |
point data has | entered and the | modified and the |
been entered | cursor moves to the | cursor stays on the |
| next IN point. | OUT point. |
|
|
|
To display the duration between an IN point and an OUT point
Use the cursor buttons to move the cursor to the IN/OUT section and press the IN button and OUT button at the same time. The duration between two points appears while the buttons are pressed.
To preroll to an IN/OUT point
Use the cursor buttons to move the cursor to the IN/OUT section and press the IN button (to preroll to an IN point) or OUT button (to preroll to an OUT point) while holding down the PREROLL button. The VTR prerolls to the point and stops.
For details on setting the preroll time, see
Note
If the cursor is not on the IN/OUT section when pressing the IN/OUT button while pressing the PREROLL button, the VTR prerolls to the cue point. When pressing the PREROLL button only, the VTR prerolls to the cue point regardless of the cursor position.
Settings Menu 4 Chapter