Settings Menu 4 Chapter
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| C UE | REC | DATE[2003/02/25] |
| |||||||||
| SCAN |
|
|
|
|
|
|
|
|
|
|
|
|
| TITLE[SONY |
|
|
|
| ] Rest | 85% |
| |||||
|
|
|
|
|
|
| |||||||
|
|
|
| ! | Delete | Cue Point: |
|
|
|
| |||
|
| No. IN |
|
|
| OUT |
| Tape |
| Format |
| ||
| ENTRY |
|
|
|
|
|
|
|
|
|
|
|
|
| POINT |
| 0 | 00:00:04:05 |
| 00:00:09:23 | 59i | 1080 |
| ||||
|
|
|
|
| |||||||||
| C UE | 1 | 00:03:45:21 |
| 01:00:36:06 | 59i | 1080 |
| |||||
|
|
|
| ||||||||||
| COMMNT | 2 | 01:04:27:23 |
| 01:05:31:24 | 59i | 1080 |
| |||||
| EDIT |
|
|
| Press [SFT]+[F5] to DELETE. |
| |||||||
|
| 3 |
|
| |||||||||
|
|
|
|
| Press only | [CLR] to CANCEL. |
| ||||||
| CHANGE |
|
|
|
|
|
|
|
|
|
|
|
|
| DATA |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
| ||||
| D EL | MARK | PRO - | TAPE | CUENUM | WRITE/ |
|
| |||||
| POINT |
|
|
| TECT | INFO | POINT | EXIT |
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
To undo the deletion of a time data or line
Press the ALT/[F2] (UNDO ALL) buttons.
A message appears (in the control panel display) requesting confirmation of the undo operation. Press the [F2] (UNDO ALL) button while holding down the SFT button. To cancel the undo operation, press the CLR button.
To copy time data of a cue point to another cue point specified in the CUE menu
1 Press the ALT/[F4] (COPY to CUE) buttons.
A copy confirmation window appears.
To cancel the copy operation
Press the CLR button.
2 Press the [F4] (COPY to CUE) button while holding down the SFT button.
The time data of the cue point is copied to the cue point indicated in the CUE menu.
Changing Mrk data
Use the cursor buttons to move the cursor to the line with the mark attribute to be changed, and then press the [F6] (MARK) button. Or, move the cursor directly to the mark attribute to be changed, and then press the [F4] (CHANGE DATA) button. In both cases, each press of the button changes the attribute as follows: OK t NG t KP (KEEP) t blank (no attribute).
Changing the recording starting point setting Use the cursor buttons to move the cursor to the recording starting point section. Then press the [F4] (CHANGE DATA) button. Each press of the button turns the setting “on” (the @ indication appears) or “off” (the indication disappears).
Entering and modifying IN/OUT point data You can use either the ENTRY button or the numeric buttons to enter and modify IN/OUT point data.
To enter or modify IN/OUT point data using the ENTRY button
2 1
1 Use the cursor buttons to move the cursor to the IN/ OUT section on which the current log data is to be entered or modified.
To move the cursor using the numeric buttons Enter the line number using the numeric buttons. Then press the [F9] (CUENUM POINT) button. The cursor will move to the line specified by the numeric buttons.
2 Press the IN button (to enter IN point data) or OUT button (to enter OUT point data) while holding down the ENTRY button.
The current time code is entered as the IN/OUT point data or it replaces the existing IN/OUT point data.
Note
If the cursor is not on the IN/OUT section when pressing the IN or OUT button while pressing down the ENTRY button, the current cue point is entered or it replaces the existing cue point. When pressing the ENTRY button only, the cue point is entered or replaced regardless of the cursor position.
To enter or modify IN/OUT point data using the numeric buttons
2
31
1Use the cursor buttons to move the cursor to the IN/ OUT section to be entered or modified.
80