Types of trouble and their solutions
Others
Symptom | Cause and/or Corrective Actions |
Easy Dubbing does not function.*1) | • Your VCR and/or video camera recorder is not set correctly. |
| c Make sure the input selector of the VCR is set to LINE. Also, |
| make sure the power switch of the video camera is set to |
| VTR/VCR (p. 103). |
| • The IR SETUP code or PAUSE MODE is not set correctly. |
| c Select the correct IR SETUP code and PAUSE MODE, |
| according to your VCR. Then confirm VCR operation with |
| the IR TEST function. (p. 103, 104) |
Digital program editing does not function.*2)
•The input selector on the VCR is not set correctly.
cSet the selector correctly, and check the connection between the VCR and your camcorder. (p. 111)
•The camcorder is connected to DV equipment other than of Sony using the i.LINK cable (DV connecting cable).
cKeep the connection, and follow the procedure on page 117.
•Setting programme on a blank portion of the tape is attempted.
cSet the programme again on a recorded portion (p. 120).
•The synchronisation of your camcorder and the VCR is not adjusted.
cAdjust the synchronisation of the VCR (p. 118).
You cannot install the USB driver.*2) | • Your camcorder was connected to your computer with the USB |
| cable before installing the USB driver, so the driver was not |
| recognised by the computer. |
| c Uninstall the unrecognised driver, and then reinstall the |
| driver. (p. 127) |
USB Streaming function does not work.*2)
•The USB driver is not installed correctly.
cUninstall the unrecognised driver, and then reinstall the driver. (p. 127)
•Your computer’s operating system is Windows 98 or earlier.
•The USB cable was not connected before starting up the application software.
c Connect the USB cable before starting up the application software. (p. 130)
The Remote Commander supplied with your camcorder does not work.*3)
•COMMANDER is set to OFF in the menu settings. c Set it to ON. (p. 143)
•Something is blocking the infrared rays.
cRemove the obstacle.
•The batteries are inserted in the battery holder with the + – polarities incorrectly matching the + – marks.
cInsert the batteries with the correct polarity. (p. 198)
•The batteries are dead.
cInsert new ones. (p. 198)
*1)
*2)
*3)
156