eSTOP button

Press this button to stop the current tape transport operation.

CDisplay section

Note

No tape transport control buttons other than the EJECT and STOP buttons will work while the REMOTE button in the remote control setting section is lit. This can be changed with the LOCAL ENABLE menu item (see page 38).

Overview 1 Chapter

aPlayback format indicators

b ClipLink indicator

cVITC indicator

dTime data type indicators

e Time counter display

h CHANNEL CONDITION indicators

gSERVO indicator

fCassette memory indicator

i REPEAT indicator

jTape end alarm indicator

k SHUTTLE/JOG indicators

aPlayback format indicators

DVCAM: This lights when a tape recorded in DVCAM format is played back.

DV: This lights when a tape recorded in consumer DV format is played back.

LP: This lights when a tape recorded in LP mode is played back.

When a tape recorded in DVCPRO (25M) format or any other format than those mentioned above is played back, none of the above indicators lights.

Note

A tape recorded in LP mode cannot be played back correctly. When a tape recorded in LP mode is played back, “DV LP” flashes and audio is muted.

12 Location and Function of Parts