Use the following procedure.
1 Press the MENU button on the menu control panel.
The menu selection level display appears on the monitor screen and in the time counter display.
Menu selection level display | ||
|
|
|
SYSTEM MENU |
| Setup menu |
|
| |
SETUP MENU | ||
HOURS METER |
| Time counter display |
|
| |
|
|
|
Monitor screen
2 Press the j button to select “HOURS METER.”
SYSTEM MENU |
| Hours meter |
SETUP MENU |
| |
HOURS METER |
| Time counter display |
|
| |
|
|
|
Monitor screen
3 Press the k button.
The cumulative counts by the digital hours meter are indicated on the monitor screen and in the time counter display.
Troubleshooting and Maintenance 6 Chapter
Digital hours meter indications on the monitor screen
All four counts (T1, T2, T3, and CT) are indicated on the monitor screen.
Resettable trip counts
Unresettable counts
HOURS METER
T1 00000 X10 HOURS
T2 0000/00000 X10 HOURS
T3 0000/00000 X10 HOURS
CT 0000/00000 X10 COUNT
T1:OPERATION
T2:DRUM ROTATION
T3:TAPE RUNNING
CT:THREADING
The
Digital hours meter indications in the time counter display
One of the four indications appears in the time counter display at a time. Use the J and j buttons on the menu control panel to change the item displayed.
Initially, only the trip value appears. Hold down the k button to display also the cumulative total from manufacture, which will appear to the right of the trip value and the slash (/).
The following illustrates the digital hours meter indications in the time counter display in all four display modes. The
T1 (OPERATION) mode:
Oper. 00000T2 (DRUM ROTATION) mode:
| Drum 0000 |
| 0000/00000 |
T3 (TAPE RUNNING) mode:
| Tape 0000 |
| 0000/00000 |
CT (THREADING) mode:
| Thread 0000 |
| 0000/00000 |
60 Maintenance