Overview 1 Chapter

Playback modes using the search dial

Playback mode

Operation and functions

 

 

Shuttle

Press the SEARCH button or the search

 

dial so that the SHUTTLE indicator in

 

the display section lights, then turn the

 

search dial.

 

Playback is carried out at a speed

 

determined by the position of the search

 

dial. The maximum shuttle mode

 

playback speed can be changed with the

 

SHUTTLE menu item (see page 39).

 

 

Jog

Press the SEARCH button or the search

 

dial so that the JOG indicator in the

 

display section lights, then turn the

 

search dial. Playback is carried out at a

 

speed determined by the speed of

 

rotation of the search dial. The playback

 

speed is up to ±1 times normal speed by

 

factory default.

 

The search dial has no detents.

 

 

You can use the SEARCH ENABLE menu item (see page

39)to select either of the following as the operation to be performed to put the unit into search mode (shuttle or jog).

• Either press the SEARCH button or turn the search dial (factory default setting).

• Press the SEARCH button.

ERemote control setting section

b9PIN button

When carrying out remote control between this unit and the unit connected to the REMOTE connector, press this button, turning it on.

ci.LINK button

When carrying out remote control between this unit and the unit connected to the DV IN/OUT connector, press this button, turning it on.

a REMOTE button

b 9PIN button

c i.LINK button

Note

When you edit using theDV IN/OUT connector, with video and audio signal input set to “i.LINK” and remote control set to “9PIN”, the locations where edit points are actually set may not be the same as the specified locations. When you set video and audio signal input to “i.LINK”, set remote control to “i.LINK” as well.

aREMOTE button

When remote-controlling this unit from the unit connected to the REMOTE connector (page 18) or DV IN/OUT connector (page 17), press this button, turning it on. When reverting to local mode to use the buttons in the tape transport control section, press this button again, turning it off.

14 Location and Function of Parts