Changing Menu Settings
This section explains how to change menu settings.
Buttons Used to Change Settings
Use the following buttons on the menu control panel to change the menu settings.
Menu control buttons | Functions | |
|
| |
MENU button | • Opens the menu and | |
|
| launches menu control |
|
| mode. |
| • Closes the menu and exits | |
|
| menu control mode. |
|
| |
J and j buttons | These buttons move the | |
| highlighted cursor up and | |
| down within the current level | |
| to select an item or setting. | |
| Hold down one of these | |
| buttons to make the | |
| highlighted cursor move | |
| continuously. | |
|
|
|
K and k buttons | • | Press the k button to go |
|
| down one level. |
| • | Press the K button to go |
|
| up one level. |
| Hold down one of these | |
| buttons to make the | |
| highlighted cursor move | |
| continuously. | |
|
|
|
RESET (NO) button | • | Returns the setting to the |
|
| factory default setting. |
| • | Sends a negative |
|
| response to prompts on |
|
| the monitor screen. |
|
|
|
SET (YES) button | • | Saves the new setting in |
|
| memory. |
| • Sends a positive response | |
|
| to prompts on the monitor |
|
| screen. |
|
|
|
Changing the Settings of Basic Items
The factory default setting is to display only the basic items. To change the settings of basic items proceed as follows.
1
3,5,7
2,4,6
A | B |
MARK9
8
1 Press the MENU button on the menu control panel.
The menu selection level display appears on the monitor. In the figure below, “SETUP MENU” is selected (shown in reverse video).
The time counter display of this unit shows only the currently selected item. When the item name is long, it is abbreviated.
Menu selection level display | ||
|
|
|
SYSTEM MENU |
| Setup menu |
|
| |
SETUP MENU | ||
HOURS METER |
| Time counter display |
|
| |
|
|
|
Monitor screen
Settings Menu 4 Chapter
Changing Menu Settings | 45 |
|
|