Settings Menu 4 Chapter

TAPE PROTECTION [Tape protct]: Settings related to tape

 

Description of settings

and video head protection

 

 

 

 

 

 

 

FROM STILL [> From STILL]:

STILL TIMER [>> STL

5 MIN [>>> 5 min] to 0.5 SEC [>>> 0.5 sec]: Select time from

Set the time to switch from

timer]: Set the time to

 

12 settings ranging from 0.5 second to 5 minutes in steps

still search mode to tape

switch from still search

 

of 0.1 second.

protection mode. Also select

mode to tape

Factory default setting: 1MIN [>>> 1min]

the type of tape protection

protection mode.

 

 

 

mode.

 

 

Note

 

 

 

 

If the value is set to 1 minute or more, the unit enters internal

 

 

 

protection mode in 1 minute, which makes start up slower.

 

 

 

 

 

NEXT MODE [>> Next

 

*STEP FWD [>>> Step]: The tape is advanced at 1/30 times

 

mode]: Select the type

 

normal speed for about 2 seconds.

 

of tape protection

 

 

 

STANDBY OFF [>>> STANDBY]: Standby off mode

 

mode to follow still

 

 

 

 

 

 

search mode when the

 

 

 

 

 

Note

 

 

time set with the STILL

 

 

 

 

The STEP setting is enabled only when “STILL TIMER” is set

 

TIMER menu item

 

 

elapses.

 

to less than 1 minute.

 

 

 

 

 

 

 

VIDEO CONTROL [Video]: Settings related to video control

 

Description of settings

 

 

 

STILL MODE [> STILL mod]: Select the image to output in

 

*AUTO [>> Auto]: Output field 1 or field 2 as the still image,

still image mode.

 

 

according to the position the tape is stopped.

 

 

 

FRAME [>> Frame]: Output a full frame as the still image.

 

 

 

FIELD1 [>> Field 1]: Output only field 1 as the still image.

 

 

 

FIELD2 [>> Field 2]: Output only field 2 as the still image.

 

 

 

 

(For DSR-1600A only)

 

 

*OFF [>> OFF]: Do not add black setup.

SETUP ADD [> Setup add]: Determine whether or not to add

 

ON (ADD) [>> ON]: Add black setup.

black setup to analog video output signals.

 

 

 

 

 

 

 

(For DSR-1600A only)

 

 

*OFF [>> OFF]: Do not mute.

CC(F1) BLANK [>CC1 blank]: Select whether to mute the

 

ON [>> ON]: Mute.

closed caption signal to be superimposed on the 1st field

 

 

 

of the output video signal.

 

 

 

 

 

 

 

 

(For DSR-1600A only)

 

 

*OFF [>> OFF]: Do not mute.

CC(F2) BLANK [>CC2 blank]: Select whether to mute the

 

ON [>> ON]: Mute.

closed caption signal to be superimposed on the 2nd field

 

 

 

of the output video signal.

 

 

 

 

 

 

 

WIDE MODE [>Wide mode]: Determine whether to retain

 

*AUTO [>> Auto]: When video being played back is

wide-screen aspect ratio information accompanying video

 

accompanied by wide-screen aspect ratio information,

being played back.

 

 

retain the information.

 

 

 

OFF [>> OFF]: Ignore wide-screen aspect ratio information.

 

 

 

ON [>> ON]: Whenever recording or playing back video, retain

 

 

 

wide-screen aspect ratio information.

 

 

 

ESR MODE [>ESR mode]: Select whether to enable the edge

 

*OFF [>> OFF]: Do not enable.

subcarrier reducer (ESR).

 

 

ON [>> ON]: Enable.

 

 

 

When playing back a composite signal, set this to ON.

 

 

 

 

 

42 Menu Contents